How to install patio sliding door lock
- Determine the handing direction from the exploded view (XO or OX).
- Make sure that the door rollers are adjusted so that the moving panel is square with the jamb
- Secure the lock in the door stile with the provided screws.
- insert the thumb turn lever into the hub of the mortise lock, as shown.
- Insert the screw bushings onto the escutcheon plates (if supplied).
- Place the inside handle against the door while holding the thumb furn into the slotted hub of the mortise lock. Align the mounting holes of the Outside Pull with the inside handle and install the provided screws.
- Install the keeper on the jamb with the provided screws. Adjust the keeper for maximum engagement with the lock.
- Please close the door, operate the lock, and check that it latches properly. If necessary, adjust the play by turning the B. Adjustment Screw on the latch just above the lock hook-CW to expend, CCW to retract.
